1390 Twp. Rd. 229 Van Buren Ohio                  Custom Dielectric Heat Sealing                   




Dielectric / "RF"

Impulse Heat Sealing

Tooling Design

 Vacuum Forming

Product Design

Die Cutting














  • For the last 29 years we have made specialized polyethylene/polypropylene products.

  • We have also designed & made proprietary tooling for a number of products.

  • Unlike Vinyl or polyurethane, polyethylene & polypropylene are sealed by heat only.

  • The equipment sends a impulse of heat through an element placed directly on the material thus resulting in the two ply's being bonded together.

  • Polyethylene & polypropylene are resistant to most chemicals which gives them an advantage over vinyl & polyurethane. 

  • Although polyethylene is usually heat sealed & not dielectrically sealed, it can be dielectrically sealed in some instances (By a method which we have developed). The polyethylene bellows above was sealed by "dielectric heat sealing".







 Phone (419) 299-3313     Fax    (419) 299-3313     Email   sales@benainc.com


Home        Service      Capabilities